Products

HEMP Filter

Products

As a Total Solution Provider, I-Spec produces top-tier HEMP filters.

We develop and manufacture protective power and signal line filters to safeguard national critical infrastructure from EMP attacks. Experience the best HEMP filters produced with top-notch technology.

HEMP Power Line Filter

Features

These power line lters designed for HEMP protection of power lines. These are suitable for voltage up to 380Vac and high current power line application.

General Specication

  • Insertion loss : 30dB min at 10kHz, 100dB min from 150kHz to 40GHz
  • DC withstanding voltage : 2250Vdc
  • MIL STD 188-125-1(Short pulse) : 6A(MAX)
  • Operating/Storage temperature : -40℃ to +85℃

HEMP Large Capacity Power Line Filter

Features

These power line lters designed for HEMP protection of power lines. These are suitable for voltage up to 380Vac and high current power line application.

General Specication

  • Insertion loss : 30dB min at 10kHz,100dB min from 150kHz to 40GHz
  • DC withstanding voltage : 2250Vdc
  • MIL STD 188-125-1(Short pulse) : 6A(MAX)
  • Operating/Storage temperature : -40℃ to +85℃

HEMP High Performance Power Line Filter

Features

These high performance power line lters has been designed to meet high insertion loss requirement of 100dB from 14kHz to 18GHz. These lters are designed for HEMP protection of power lines. These are suitable for voltage up to 380VAC and high current power line application.

General Specication

  • Insertion loss : 100dB from 14kHz to 40GHz
  • DC withstanding voltage : 2250Vdc
  • MIL STD 188-125-1(Short pulse) : 6A(MAX)
  • Operating/Storage temperature : -40℃ to +85℃

HEMP Low Leakage Current Power Line Filter

Features

These low leakage current power line lters designed for HEMP protection of power lines. These are suitable for voltage up to 220Vac power line application. Maximum leakage current is 10mA at 220Vac/50,60Hz measured from line to ground.

General Specication

  • Insertion loss : 20dB min at 10kHz, 100dB from 3MHz to 40GHz
  • Leakage Current : 10mA max at 220Vac/50,60Hz
  • DC withstanding voltage : 2250Vdc
  • MIL STD 188-125-1(Short pulse) : 6A(MAX)
  • Operating/Storage temperature : -40℃ to +85℃
  • Dimensions

  • Insertion Loss

HEMP Single Line Filter

Features

These signal line lter are designed for HEMP protection of signal lines. This is suitable for voltage up to 100Vdc and signal line application.

General Specication

  • Insertion loss : 35dB min at 10kHz, 100dB from 150kHz to 40GHz
  • MIL STD 188-125-1(Short pulse) : 6A(MAX)
  • Operating/Storage temperature : -40℃ to +85℃

HEMP Data Line Filter

Features

These DATA line lters are designed for HEMP protection of UTP, TEL line.

Filter for LAN

  • Rated Voltage : 10Vdc
  • Rated Current : 1A
  • Line Number : 4
  • Data transfer rate : 100Mbps
  • MIL STD 188-125-1(Short pulse) : 0.1A(MAX)
  • Operating/Storage temperature : -40℃ to +85℃

Filter for TEL

  • Rated Voltage : 200Vdc
  • Rated Current : 0.5A
  • Line Number : 2
  • MIL STD 188-125-1(Short pulse) : 0.1A(MAX)
  • Operating/Storage temperature : -40℃ to +85℃

Filter for IPCamera

    Control Line(2Line)
  • Rated Voltage/Current : 10Vdc/1A
  • MIL STD 188-125-1(Short pulse) : 0.1A(MAX)
  • Data Line(4Line)
  • Data Rate : 100Mbps
  • MIL STD 188-125-1(Short pulse) : 0.1A(MAX)